Rimfire Central Firearm Forum banner
1 - 1 of 11 Posts

· Premium Member
39,122 Posts
Hi all:

Getting a new stock for my Savage MKII and considering if I should bed the action or not. Anyone got any tips on how to do this or is it a job best left to the pro's? I'm not super-handy, but it looks like one just sort of puts the epoxy in the action channel, put the action in, secure with surgical tubing, and wipe away excess epoxy? I'm sure there's more to it than that, so any help would be greatly appreciated.

You do want to use a release agent on the barrel so that the barreled action is not permanently attached to the stock.

Brownell's has some nice kits and "how to do" guides for bedding. :bthumb:

Read up a lot and make sure you use lot's of release agent and you'll have fun. :)
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.