[Danw530]

want to get into mine for the Mods RON AKA described but started to get into it and felt a sudden wave of panic, because I plan on shooting it this weekend and dont want to lose anything of not be able to get it back together.

got the stones ready for polishing and ready to go but i know nothing about how this trigger works.


thanks in advance.

 

[AzizaVFR]

It is very easy to pull the trigger group apart. You have to deal with in this order:
1. Safety spring
2. Trigger pivot pin, then remove the trigger and accutrigger blade.
3. Safety pivot pin, then remove the safety.
4. Sear pivot pin, then the sear/sear spring.

It is so much easier to take apart than a 10/22. Follow the thread about lightening the trigger carefully. Make very small adjustments and test often.

 

[Cu-Melter]

"Da Man Speaks Truth"

 

[Danw530]

ok ill give that a try I guess it s such a difference than most so was nervous, will probaby try it sunday evening, after all te shooting is done.

 

[Cu-Melter]

This WILL help