Rimfire Central Firearm Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
97 Posts
Discussion Starter · #1 ·
I'm about to build my first Ultimate. Here is what I have so far.

Basic Ruger 10/22
Yukon Extreme Woodland Camo Stock
Tactical Solutions Threaded Barrel Matte Green
Tactical Solutions Comp Matte Green
Nikon Camo REALTREE Hardwoods Green HD 3-9x40 ProStaff Riflescope
Nikon Camo REALTREE Hardwoods Green HD Medium Riflescope Rings
Power Costums..... 10/22 Titanium Bolt Handle Assembly
10/22 Hammer and Sear Pack
10/22 Competition Titanium Extended Auto Bolt Release
Volquartsen ..........10/22 Hex Head Take Down Action Screw
10/22 Exact Edge Extractor
10/22 Extended Magazine Release-Black
10/22 ShockStop Bolt Buffer
sling swivel studs

Thats it so far.. can anyone see anything that I'm missing that makes a significan improvement? I was also wondering about the benafits of an aftermarket firing pin. Would you recomend I get one? What brand? can you think of anything else?
 

·
Registered
Joined
·
3,389 Posts
I have never needed to change the firing pin or extractor on a 10/22. The only thing you did not list is a base gun! Hopefully you have one on hand to put all those goodies into!!
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top