Rimfire Central Firearm Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
181 Posts
Discussion Starter · #1 ·
This is NOT a question about "to clean or not to clean" although cleaning may be part of the discussion.

Here is the situation. With a clean barrel, GM 20" stainless, I shoot 3 foulers to get on target. The next 10 to 15 shots will be some of the best groups I have ever fired. All is well with the world. Subsequent shots will start to open up to double my group size.
If I clean the barrel, this pattern will repeat each time.

If I don't clean the barrel, one or two out of the next 5 groups, 5 shots per group, will come in like the very first, with the others being ugly. This pattern will repeat for as many rounds as I can run through it.

I have about 900 rounds through the barrel. Is this something that will clear up and get better with time? Don't see how I could ever try to shoot a USBR target with this going on.

Now for the cleaning part. I use a nylon brush in the chamber with some shooters choice, and follow that with a soaked patch on a patch worm, followed by dry patches until clean.

Ammo is Wolf MT. I get about the same results with Eley target rifle, PMC scoremaster and CCI mini mags, with best groups coming from the Eley and Wolf.

For those who have used it, would Moly fusion do anything for this?

Thanks for any help :)

Tony
 

·
Registered
Joined
·
181 Posts
Discussion Starter · #3 ·
Thanks for the info. I guess I was wanting to find out if my situation was unique. It seams not. I had high hopes for the WMT.
Ordered some Lapua and some more Eley today.
The quest continues.

Tony
 

·
Registered
Joined
·
181 Posts
Discussion Starter · #7 ·
Well, heres a little update.

I've had the chance to Moly fusion my barrel, twice. Shot about 150 rounds between applications. After the first time, I was able to fire more groups before the accuracy started to fail. Not quite a whole box. (wolfMT)

Reapplied the MF and shot more today.

First, I tried a box of Eley target rifle. Great groups after 4 or five to foul the barrel. Did not make it through the box before the groups opened up. (somewhere around 35 rounds)

Cleaned the bore with a couple dry patches and finished the Eley with better grouping.

Cleaned the bore with a wet and then a few dry patches and fired a box of WolfMT. (Patchworm)

Groups stayed great through the whole box. Never opened up at all. Also noticed the barrel only took two rounds and it was dead on. No extra fouling shots required, less ammo wasted.

Thanks for all the help. This is a great site. Still waiting on the Lapua.

Oh yeah, the Eley target rifle was no better than the wolf MT where accuracy was concerned.

Tony :D
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top