Rimfire Central Firearm Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
199 Posts
Marlin has a laminated stock for the 983ss that will fit the 981t with very little fitting. The cartridge lifter pivot pin is wider on the 981t and so a little bit of the stock on each side needs to be inletted.
 

·
Registered
Joined
·
199 Posts
I don't remember if the trigger guard came with it or not. When you order the stock, let Marlin know what it is for and they should be able to help you with the parts that you need.

 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top