Rimfire Central Firearm Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
159 Posts
i have a 75 target and i have found a lyman targetspot scope will the weaver mounts (bases) that are on the gun work on the set of holes on the barrell or do i need one made for the two holes on the barrell
I'm confused. You ask if the bases already on the gun will work on the set of holes on the barrel. If they are on the gun they should be in those holes already. There would normally be two rings on the scope and two bases on the barrel. As indicated above, the hole spacing is different for each of the two bases. The distance between the bases is a different dimension entirely. The Lyman scope tube should be long enough to fit the relatively long spacing between the 75's existing base patterns.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top