Rimfire Central Firearm Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
5,143 Posts
Also check to see if an extractor or bolt cross pin was backed out slightly. They can creep out if loose and snag when the bolt is reinserted.
 

·
Registered
Joined
·
5,143 Posts
Bend the ejector slightly to get it out of the way. You dont even have to disassemble to get it done. Just tap it one way or pry it the other.
 

·
Registered
Joined
·
5,143 Posts
Assemble the rifle without the ejector and see if the problem goes away. If it does then I can send you a new ejector.
 

·
Registered
Joined
·
5,143 Posts
PM returned. I have spare ejectors.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top