Rimfire Central Firearm Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
518 Posts
The main problem a lot of guys have with the slip-on grips (either Pachmeyer or Hogue) is that if they don't fit just right, they won't stay tight on the grip.
In any event, the slip-on grip would need to be removed to disassemble the pistol.
 

·
Registered
Joined
·
518 Posts
I am considering the grip mod. on my 22/45. I am not real well versed on the Colt .45 parts but wonder... Do the aftermarket suppliers have different thicknesses available? I noticed my frame had the "grip" thicker at the top than bottom where they are nearly flush in comparison. Are .45 grips available in varying thicknesses? I would like them a bit "chubby" if possible.
Brent
They're available thinner than standard. I don't know about fatter. If they are, they'll advertise them as such.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top