Rimfire Central Firearm Forum banner

17VS rings for Elite 4200

774 4
Got an Elite 4200 6-24x40mm AO.

Couldn't find the Burris Signature 22 rings in stock anywhere. With those I could use the inserts if needed.

Has anyone had success using other rings like, say the Burris Deluxe 22 high or the Millet 22 high?

Your advice will be appreciated. The scope looks great lying beside the rifle, but I need to get it mounted!
1 - 5 of 5 Posts

·
Registered
Joined
·
312 Posts
Hey I just went through the same thing. I found the Burris rings at Colorado Optics. They have plenty of them, $44 and that included shipping. 800-610-6607
wish I would of know that. Ordered mine from Midway....on back order of course.........(sigh).
 

·
Registered
Joined
·
3 Posts
i found a set of rings from bkl technologies out of brownsville tx that would premit enough elevation to mount a 40mm with an adjustable objective with room to spare. the height from the top of the rail to the bottom of the scope saddle is 3/4 in.
bkl claims that one can mount a 50mm on this scope ring set.
 

·
Registered
Joined
·
198 Posts
Millet Rings

Just mounted the Bushnell Trophy
3-9x40mm on my 17VS tonight. There
is more than plenty of clearance for it
any would be perfect for your AO scope.
You would probebly have 1/8"
clearance, since I have close to a quarter.

But when the directions say backing
a screw out two turns for centering,
don't believe it. They were a bear for
me to get centered.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top