Rimfire Central Firearm Forum banner


2714 Views 45 Replies 16 Participants Last post by  wreckster84
Hi All I,ve been away for a while but am starting to get back into it by building a reasonably priced Ruger 10/22 Rifle.
I am going to use all Ruger parts except for the Barrel. I want to use a Lite or Ultra Lite Bull Barrel. I have been looking at all the Barrel Manufactures on the internet but am trying not to spend $300 to $400. I could use some direction as to where to pick up a good 16 to 18" Threaded Barrel for a good price? Any & all suggestions are greatly apricated.

Thanks & Happy Thanksgiving
Jerry D
1 - 6 of 6 Posts

· Premium Member
12,040 Posts
Nice 👍 is that a magnum charging handle? And what kind of bolt is that
But the receiver is sitting too low at the back of the stock, too much wood edge and no way that trigger body should be hanging out that much. Is that a magnum stock? Or is the action screw so long that that its teetering the action backwards?
As for the barrel push up thingy, could we get a picture of that?
1 - 6 of 6 Posts