Rules...
1. Open to any rifle that meets SuperStock Bolt guidelines.
2. Targets will be shot at either 25 or 50 yards. Each having their own club.
3. One shot at each of the 25 tacks above the sighters. Sighters can be shot at multiple times.
4. 20 "tacks" driven makes the "tack" drivers club with each additional tack receiving a star up to 25.
5. Inner circle must be broken with the bullet hole to be considered driven
6. Once you reached 25 you will have a 5 star "tack" driver and are finished with that rifle.
7. Any ammo,rest, and scope.
8. Must post picture of target, gun, and ammo to be added.
9. No machine rests or return to battery rests
25 Yard Target
50 Yard Target
Printing Tips:
1 Make sure to click on actual size in adobe which sets print scale at 100%. This is located right below the create pdf tab in between the - and + sign. Click on the down arrow beside the percentage value.
2 After you go to print target in adobe and your printer page comes up make sure that page scaling is set to none and it is showing the document and paper size to be the same or 1/1 where the preview is shown.
3 If you printed the target correctly the "Tacks" should be .375 outside diameter.
Have Fun