Rimfire Central Firearm Forum banner

Hogue Ultimates

459K views 633 replies 316 participants last post by  59801 
#1 ·
Since B&C has a page why can't we see some of those Hogue Ultimates:Blasting_
 
#6 · (Edited)
Lots of upgrades, the stock wasn't one of them.


25 year old Ruger 10/22 receiver
18" Green Mountain Bull
Rimfire Tech V-Block
Kidd Bolt/Bolt Buffer
Rimfire Tech Bolt Handle Assembly (matte smooth)
Volquartsen Trigger w/Hornet polished trigger plunger
Volquartsen Hammer with factory hammer spring assembly (somewhat polished)
Mueller APV with Burris Zee Signature Rings (Medium) and Power Custom base

Not as ultimate as most but somewhat upgraded.
 
#19 ·
I don't have pics of mine right now, but here are the specs:
Hogue Overmold
compensated Adams & Bennett .920 barrel
Power Custon hammer & springs
Power Custom Big Head ambi safety
Eagle mag release
Simmon Aetec 3.8x12x44AO
Leupold base & Redfield rings
Skeletonized factory bolt handle
Jeweled bolt
everything inside the action that moves has been polished
This is by no means a big $$$ ultimate, but it works great. I built it in about '98 when the Hogue Overmold came out. The stock and barrell were about $115 from Midway. This is mainly a hunting rifle, but I shoot it year round. The rubber on the stock is holding up fine and I don't baby this gun at all. The stock is holding up better than the finish on the receiver and trigger guard. For a REAL hunting rifle, I think this is one of the better stocks. No complaints at all here.
 
#21 ·
Mine.





Houge stock, B.C. blued, fluted and triported .920 barrell, Harris Bipod. Mueller APV on PC rail with Burris Sig Zee med rings.

Only about 200 rounds through the rifle so far (darn weather) but I have fired Federal Bulk Remington Golden, and some very old Mohawk .22 LR through it and not one FTF or FTE.
This is my first 10-22, and I am looking forward to getting the round count way up when spring arrives. I will do some mods in the trigger group area as I go.
 
#22 ·
tac sol threaded barrel. tac sol rail. burris rings. tac sol mag release. harris bipod. i refinished the receiver and trigger pack along with most of the internals in flat black molyresin.

i still need to replace the scope. i plan on getting a burris timberline 4.5-14x32




 
#28 ·
Here's mine. To me, this is ultimate. I don't need a fancy stock.



More pics here.
 
#34 ·
My Hogue Ultimate SS

I've posted it in all the other threads... why not here to? Just finished it up today.

- Woody



• Stock 10/22 Receiver refinished in Molyfusion by Mike at Oxford Armory
• Stock 18.5" barrel that was "Nemoized". Nemo also shortened it to 16.25" for me. Dovetail filled/smoothed and Molyfusion by Mike at Oxford Armory
• Hogue Overmold stock for standard barrel
• CPC'd blackened bolt by Randy with Volquartsen Extractor
• Ruger Magnum charging handle with Power Custom guide-rod and spring
• Stock Ruger trigger group reworked by Swampy
• Rimfire Tech pull mag release
• Intensity Optics 6.5-20x44 Scope
• Deadnutz 1pc Scope base - Medium
• Harris 9"-13" notch-leg bi-pod
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top