Anschutz .222 - RimfireCentral.com Forums

Go Back   RimfireCentral.com Forums > > >

Notices

Join Team RFC to remove these ads.
Reply
 
Thread Tools Display Modes
  #1  
Old 10-10-2019, 04:36 PM
JamesHP is online now

Join Date: 
Aug 2019
Posts: 
93
TPC Rating: 
0% (0)
Anschutz .222



Log in to see fewer ads
I have been considering purchasing an Anschutz .222 and have done a bit of reading. I have found a few comments regarding the accuracy of the 1740 not being quite up to snuff. Does anyone have any experience with the 1740 or, the 1771? Was there a change in design between the 1740 and the 1771?

Thanks,

Jim
Reply With Quote
  #2  
Old 10-10-2019, 05:29 PM
kimberkook's Avatar
kimberkook is online now

Join Date: 
Nov 2005
Location: 
Oregon
Posts: 
1,659
TPC Rating: 
100% (93)
I'm a fan of the 1710 rimfire models and anything 222 Rem centerfire, but I've been hesitant to get a 1740 because of its rear lock action. Frankly, that's not the best for centerfire. Other threads on RFC have posts cautioning that the 1740 is basically a "rimfire" action that can only stand the pressure of "factory" or SAAMI spec small centerfire ammo. I don't balk at that because I don't prefer hot loads, but the hugely lower price of other great 222 rifles makes the Anschutz a purchase that can't be justified by simple utility or accuracy.

That said, your post did give me pause to check the Anschutz NA website for specs on the newer action, the 1771. Well, to my surprise, it's a front lock system, and a two-stage trigger is available! I stole this from the listing there:
1771 Two-Stage Trigger

SKU: 013240
$2,395.00
Caliber: .222 Remington
System: 1771 bolt action repeater, six front locking lugs, blued finish.
Weight: 7 lbs, 7 oz.
Barrel Length: 23" heavy barrel, no iron sight provision.
Magazine Capacity: 4
Trigger: 5098/71 Two-Stage Trigger
Stock Style: Germany styled walnut.

***Currently Sold Out***
***Special order available upon request***
***Extra fees and price changes may apply***
Reply With Quote
  #3  
Old 10-10-2019, 05:58 PM
Guy
US Navy Veteran

Join Date: 
Feb 2005
Location: 
Central NH close to Maine
Posts: 
1,171
TPC Rating: 
100% (2)
Interesting

SMLE is a rear locking action in .303. My 1948 version seems fine and my 1740 is quite accurate.
Reply With Quote
Sponsored Links
Advertisement
 
  #4  
Old 10-10-2019, 05:59 PM
TEDDY BEAR RAT's Avatar
TEDDY BEAR RAT
NRA Member - Click Here To Join! UotM

Join Date: 
Jun 2009
Posts: 
5,396
TPC Rating: 
100% (33)
Within factory pressure limits, the 1740 is no problem at all, just don't push it...and don't fire loads developed in the winter during hot varminting weather.

I agree, though, with all the eminently affordable Sako L-46s .222s out there, or even the nice-but-less-refined 527 .222s and .221s, there really is no reason to consider the 1740. I have been quite curious about the new 1771s, though. Frankly, Anschutz has released some real centerfire turds in the recent past, so I would really like some objective reviews on the 1771. Even with stellar reviews, it would have to be really exceptional to prompt me to pony up $2400, again with $600 527s, $700 L-46s, and $1400 Cooper 21s available all day every day.

BTW, I just bought a 1961 Sako L-46 .222 with milled bottom metal for under $650. The quality clearly outshines most any rifle I can think of. The rings are little jewels of precision, and, even the detachable magazine is exceedingly well made. Truly nothing made like that anymore.

TBR
Reply With Quote
  #5  
Old 10-10-2019, 07:49 PM
dgeesaman

Join Date: 
Nov 2014
Posts: 
600
TPC Rating: 
0% (0)
Even on a gentle round like a 222, the 1771 action unnerves me because the lugs are machined into the barrel and nobody can rebarrel it. I asked Anschutz and they'll only sell a full new barreled action.
Reply With Quote
  #6  
Old 10-11-2019, 11:21 AM
BobW.
US Air Force Veteran NRA Member - Click Here To Join!

Join Date: 
Aug 2006
Location: 
Saint George's Delaware
Posts: 
63
TPC Rating: 
0% (0)
Back in the 90's I had a beautiful Sako 222, deluxe model. After I figured out the action screws were loose it shot extremely well. It had the "box car" bolt.
I can't say enough good things about Sako's, well built and accurate.
Like a dumb A_ _ I sold it.
Reply With Quote
  #7  
Old 10-11-2019, 05:29 PM
FALPhil's Avatar
FALPhil
US Navy Veteran

Join Date: 
Mar 2008
Posts: 
626
TPC Rating: 
100% (1)
Remington 788s are well-known for their accuracy. At the price point they sold new for, they were stupid accurate, and many a budget benchrest rifle has been built on a 788 action. They are rear-lugged.

The former French sniper rifle, the FR-F1, and its successor, the FR-F2 were both build on a modified MAS 36 action, which is also rear-lugged. Several European sniper competitions have been won with the FR-F1 and FR-F2.

All this is to say that, theoretically, rear-lugged actions shouldn't be as accurate, but that has always been a theory, and has not been scientifically tested. But then, in theory, a bumblebee shouldn't be able to fly...

I don't own any Anschutz rifles, but it would be very hard for me to imagine that they would get a rifle to market that was fundamentally inaccurate.
Reply With Quote
  #8  
Old 10-11-2019, 09:54 PM
newbie2

Join Date: 
Oct 2004
Location: 
Erie, PA
Posts: 
2,290
TPC Rating: 
100% (2)
The 788 had a very fast lock time.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off




All times are GMT -5. The time now is 09:00 PM.

Privacy Policy

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2000-2018 RimfireCentral.com
x