Ruger 10/22 or convert to a 17hmr - RimfireCentral.com Forums

Go Back   RimfireCentral.com Forums > >

Notices

Join Team RFC to remove these ads.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-02-2019, 08:26 AM
Phelpsm

Join Date: 
Jan 2019
Posts: 
8
TPC Rating: 
0% (0)
Ruger 10/22 or convert to a 17hmr



Log in to see fewer ads
An it be done with using a aftermarket steal receiver ?
Reply With Quote
  #2  
Old 02-04-2019, 10:58 AM
Magnum22

Join Date: 
Oct 2018
Location: 
Northeast Tennessee
Posts: 
11
TPC Rating: 
0% (0)
Conversions

Hello,

I'm not exactly an expert in this area, but it seems like the 22wmr and 17 hmr parts are basically interchangeable. IF that's the case, you should be able to convert any 10/22 Magnum to 17 with a barrel change. IF you're talking about converting a standard 10/22 (22lr) to 17 hmr, you will definitely need a new receiver, since the 17's are significantly longer than 22lr. This means you will have to have all new internals made to fit the Magnum sized receiver. Hope this is helpful!

Happy Shooting
Reply With Quote
  #3  
Old 02-04-2019, 10:57 PM
DRob's Avatar
DRob
Law Enforcement Officer NRA Member - Click Here To Join!

Join Date: 
May 2003
Location: 
Indy
Posts: 
3,077
TPC Rating: 
0% (0)
Theories

In theory, this is true. The trick is going to be finding a .17 HMR barrel and a suitable receiver. I'll check the owner's manual I have which lists the 10/17 HMR part numbers as well as the 10/22M parts. Those parts have not been available from Ruger for a long time. I'm just curious.
Reply With Quote
Sponsored Links
Advertisement
 
  #4  
Old 02-05-2019, 04:31 PM
coloradokid
NRA Member - Click Here To Join!

Join Date: 
Jun 2018
Posts: 
187
TPC Rating: 
100% (2)
Can you post picture of manual pages with part differences?
Reply With Quote
  #5  
Old 02-05-2019, 10:38 PM
DRob's Avatar
DRob
Law Enforcement Officer NRA Member - Click Here To Join!

Join Date: 
May 2003
Location: 
Indy
Posts: 
3,077
TPC Rating: 
0% (0)
Manual

The manual has a 7 page parts list and 6 pages of parts diagrams. It includes parts for the 10/22 carbine and 10/22 rifles in .22lr, .22WMR, and .17 HMR.
A couple of examples with Ruger part numbers:
Barrel
.22 lr - 0B8009
.22 WMR - 0B8004
.17 HMR - 0B8008

Complete Bolt Assembly
Standard finish - B-10A (.22lr)
Color Buffed - B-10C (.22lr Deluxe Sporter & Target Models)
.22 WMR - B21006
.17 HMR - B21004

Some parts are common to all models. The hammer, for example, does not have a unique part number for the WMR or HMR model. The Target model hammer does have a unigue part number. However, the WMR and HMR models share a different hammer spring as compared to all .22lr models. There is at least one error in the parts list. They describe the WMR/HMR magazine (JMX-1) as having a 10 shot capacity. We know better and other text in the manual refers to the correct 9 shot capacity.

There is no listing for any receiver. I'm assuming that's because it is the serial numbered part and is "the gun", legally speaking. We know the magnum receiver is steel with scope ring bases machined into the top. The assumption follows that the HMR receiver would have been the same had it ever come to market.

I've had people try to tell me no such manual exists since the 10/17 never went on sale to the public. The fact that the manual was printed tells us how close it came. I am not posting a photo of mine but here's one for sale on eBay.

https://www.ebay.com/itm/2004-Origin...ss!46237!US!-1

Last edited by DRob; 02-05-2019 at 10:53 PM.
Reply With Quote
  #6  
Old 02-06-2019, 09:20 AM
coloradokid
NRA Member - Click Here To Join!

Join Date: 
Jun 2018
Posts: 
187
TPC Rating: 
100% (2)
Thanks, was curious.
Reply With Quote
  #7  
Old 04-15-2019, 12:14 PM
m17hm2's Avatar
m17hm2

Join Date: 
Dec 2018
Posts: 
241
TPC Rating: 
100% (1)
Is anyone selling aftermarket 22wmr/17hmr length receivers? I've seen the 80 percent jobs, but don't want to go there.

Is the 22lr bolt and 22wmr bolt the same length?
Reply With Quote
  #8  
Old 09-15-2019, 11:23 AM
ffracer
US Navy Veteran

Join Date: 
Jan 2011
Location: 
Oregon
Posts: 
36
TPC Rating: 
100% (1)
Quote:
Originally Posted by m17hm2 View Post
Is anyone selling aftermarket 22wmr/17hmr length receivers? I've seen the 80 percent jobs, but don't want to go there.

Is the 22lr bolt and 22wmr bolt the same length?
CZ, and they come with a bolt, barrel, trigger, and stock!

When I was shooting 10/22's you could and I did convert a 22lr to 17 M2 with just a bolt change. It's not that easy with a 17 because of the pressure curves, out of battery discharges were often a problem. I understood that it caused Ruger to discontinue the 10/17 after a couple years. Volquartzen made em for a while, maybe still do but it's not as simple a conversion as with the Mach2.
Reply With Quote
  #9  
Old 09-15-2019, 02:03 PM
Chaser's Avatar
Chaser is online now
NRA Member - Click Here To Join! UotM

Join Date: 
Aug 2005
Location: 
S.E. Idaho
Posts: 
20,521
TPC Rating: 
100% (74)
Send a message via AIM to Chaser
Conversions are very very tricky to get the timing right/correct/perfect.. It's just one reason that the HMR and HM2 ammo Mfg's washed there hands of liability when they issued recalls/buybacks and warnings against usage with semi's when the conversions hit the market. I say with experience look elsewhere to spend your money. Even the Savage A17 that I bought/tried and then sold blew residue out and on your face with each shot... usable and functional BUT only with good eye-wear.. a no brainer with any Firearm BUT still it was a nuisance.. I suggest a good quality bolt Rifle. MANY conversions that have been tried ended in dis-assemble and sale of the conversion components...My .02.

This is just one of the many FAILS - HM2 but you get the picture.. OOB KABOOMS will wake yer Arss up :

__________________
"I have a very strict gun control policy: if there's a gun around, I want to be in control of
it." --Clint Eastwood

Last edited by Chaser; 09-15-2019 at 02:24 PM.
Reply With Quote
  #10  
Old 09-16-2019, 05:40 PM
DRob's Avatar
DRob
Law Enforcement Officer NRA Member - Click Here To Join!

Join Date: 
May 2003
Location: 
Indy
Posts: 
3,077
TPC Rating: 
0% (0)
This is a recording

Quote:
Originally Posted by ffracer View Post
CZ, and they come with a bolt, barrel, trigger, and stock!

When I was shooting 10/22's you could and I did convert a 22lr to 17 M2 with just a bolt change. It's not that easy with a 17 because of the pressure curves, out of battery discharges were often a problem. I understood that it caused Ruger to discontinue the 10/17 after a couple years. Volquartzen made em for a while, maybe still do but it's not as simple a conversion as with the Mach2.
I'm going to start with the assumption you meant barrel change rather than bolt change. You're correct that taming the pressure curve was the big issue. Commonly called "the dreaded pressure spike" back when lots of guys were fiddling with .17 conversions. Lots of pressure trying to escape through a smaller diameter tube (AKA bore) was the culprit. It could be successfully tamed by retarding bolt movement via added weight or stronger recoil and/or hammer springs. There was no common "fix" and every gun had to be tuned as an individual. This is not a workable process in a mass-produced gun. I have both a carbine and a Charger converted from .22lr to .17 HM2. The shorter the barrel, the easier it is to tame the pressure spike. The Charger has a 12" barrel and all it took was a stronger recoil spring. The 16" carbine has a VQ CF barrel and took recoil and hammer spring increases. Both run and shoot very well...(here's the recording) IF I CLEAN THE BARREL/CHAMBER ABOUT EVERY 50 SHOTS. Maintenance is the issue. Guess who's to blame for that!

Ruger NEVER put a "10/17" on the market, though they came close. It was stillborn when they killed the 10/22 magnum from which it evolved. The "fixing" of the 10/22M bolt by adding a second "extractor" on the left side of the bolt was the killer. It created a thin/weak section on front/lower edge which broke off if/when that 2nd extractor came adrift and was captured within the receiver. My 10/22M, minus that 2nd extractor, is easily converted to .17 HMR now by just switching barrels. It required heavier springs and shoots both calibers very well. SEE THE ABOVE RECORDING.

Last edited by DRob; 09-16-2019 at 10:06 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
High end ammo in 1 MOA Ruger 10/22. Ever wonder if that $18 box of ammo is worth it? CatDoc .22 Ammunition (S-L-LR) 19 10-27-2018 04:54 PM
"Companion" Magazine Bumper for Ruger 10/22 (2-PACK) TANDEMKROSS TANDEMKROSS 5 09-19-2018 12:57 AM
"Companion" Magazine Bumper for Ruger 10/22 (2-PACK) TANDEMKROSS TANDEMKROSS 0 01-24-2018 09:07 AM
Review: Sarco "M1 Carbine" Stock for Ruger 10/22 butler 10/22 Stocks - Factory & Aftermarket 1 11-11-2017 08:16 PM
"Companion" Magazine Bumper for Ruger 10/22 (2-PACK) TANDEMKROSS TANDEMKROSS 0 10-20-2017 09:04 AM



All times are GMT -5. The time now is 03:50 PM.

Privacy Policy

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2000-2018 RimfireCentral.com
x