Put an 7-2 in an 7-4 stock (trigger mod) - Page 2 - RimfireCentral.com Forums

Go Back   RimfireCentral.com Forums > >


Join Team RFC to remove these ads.
Thread Tools Display Modes
Old 09-06-2019, 03:00 PM
US Air Force

Join Date: 
Jan 2014
TPC Rating: 
0% (0)

Log in to see fewer ads

I have had it all apart, just neglected to capture it on film. Mostly would have shown me cursing and searching under the bench floor very small very important parts! Yes, if one were to go so far as add adjust-ability to an 7-2, for the stage one resistance, it would entail drilling and tapping right below the spring attachment on the inside bottom of the trigger assembly. Then find an nice threaded rod to match the threads, flatten the bottom end and slot for screw-driver. On the top of this and inside the trigger housing would be an "end cap" with an attachment point for the end of the spring. So as you loosen the threaded rod (back it out) is extends the spring adding tension. The end cap is not threaded but picture a ball end on the top of the threaded rod, and an end cap with a ball shape crown with a slot on one side to allow the rod and ball end to enter but not leave under stress. so this basket like end assembly keeps mechanical attachment to the threaded rod as it turns and does not itself turn. The actual part is even nicer because it has machined sides which "ride" in an race provided to further ensure no spring twisting. It is an small part, and it will try very hard to blend in with whatever is on the floor under your bench.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Trigger happy JetGirl CZ / Brno 112 06-09-2019 09:53 AM
My 3 10/22 super stock IanC SuperStock 2 01-13-2019 02:15 AM
"New" John Langley CZ Trigger On The Way dnttech CZ / Brno 16 02-01-2018 10:05 AM
Ishmash CM2 Trigger Spring Mod thesandman Russian Rimfires & Biathlon 1 07-08-2017 12:44 PM
Custom CZ 455 Benchrest Stock dnttech CZ / Brno 19 05-10-2017 08:36 AM

All times are GMT -5. The time now is 04:12 PM.

Privacy Policy

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2000-2018 RimfireCentral.com