$40.95 plus shipping and handling for 4 springs!? No thanks. I followed the directions in this post, kept ALL of my FULL power springs intact and have a crisp trigger pull of less than 4lbs. Functions perfectly and cost me around free-ninety-free...now if you could deliver a trigger pull of say, hmm 23 ozs, I would be interested.
I read through this entire post and learned alot. I didn't see any videos about a Marlin 795 Trigger Job so I made a video series that shows what I did. I couldn't have done it without all your help.
My trigger is now at 2.5 lbs (or some might say 40 oz) and it feels smooth and crisp.
I read through this entire post and learned alot. I didn't see any videos about a Marlin 795 Trigger Job so I made a video series that shows what I did. I couldn't have done it without all your help.
My trigger is now at 2.5 lbs (or some might say 40 oz) and it feels smooth and crisp.
Let me know what you think. Thanks.
Very nicely done!! The quality of the videos and the detailed explanations should make it very easy for someone to follow....
I read through this entire post and learned alot. I didn't see any videos about a Marlin 795 Trigger Job so I made a video series that shows what I did. I couldn't have done it without all your help.
My trigger is now at 2.5 lbs (or some might say 40 oz) and it feels smooth and crisp.
Let me know what you think. Thanks.
Very nicely done!! The quality of the videos and the detailed explanations should make it very easy for someone to follow....
Just watched these vids and I will be doing some of these mods, thanks for taking the mystery out of the sideplate breakdown . I created a playlist to save these, much appreciated sir! My fairly new 795 will be getting some work, my older 60 would benefit some, but after 20yrs it's got a pretty nice trigger already
My question is what is your opinion of this kit? Too costly? Don't trust/believe it? Too complicated, etc?? Great idea?? Go ahead and be brutally honest.
Thanks!
ELCAR
That's good a idea. Price is ok but if you only charged .99 cents to ship and threw them in a bubble envelope I think you would do well with them.
Heck, I might even be your first customer.
Side note: You have pics of a lower receiver and a TG. Best to emphasize in the notes in BOLD " Auction is for springs only!"
got a rimfirecentral member disco? I'll order from you tonight if so
I think I'd like to try the springs and then if I decide to do more, I'll use this thread as a guide. It is VERY informative and valuable! Thanks to all!!
After putting over 500 rounds through my 795 its time to lighten the trigger.
Great information on the site, the videos and pics are perfect. I have never done any trigger work and this makes me feel pretty confident that I can get it done. I think I will still order a new sear and hammer just in case
I have found several types of fine stones ebay/amazon etc ranging from $8 to $100. Does the type matter? There is a triangular jewlers stone on ebay for $8 that looks like it will do the trick
No thanks. I followed the directions in this post, kept ALL of my FULL power springs intact and have a crisp trigger pull of less than 4lbs. Functions perfectly and cost me around free-ninety-free...now if you could deliver a trigger pull of say, hmm 23 ozs, I would be interested.
Hope those parts are getting machined soon!
Linear Mode
