New TC R22 trigger doesn't reset - RimfireCentral.com Forums

Go Back   RimfireCentral.com Forums > >

Notices

Join Team RFC to remove these ads.
Reply
 
Thread Tools Display Modes
  #1  
Old 09-13-2019, 07:39 PM
Jake7NCVA

Join Date: 
Sep 2019
Posts: 
1
TPC Rating: 
0% (0)
New TC R22 trigger doesn't reset



Log in to see fewer ads
Hey, so I have a new T/C R22. This is what it does. When I load it - chamber a round by closing the bolt - the trigger stays all the way to the rear. If I push it forward then its set and the gun will fire now by pulling the trigger. Also, after I push the trigger forward and it sets, it is maybe 2 pounds to pull it. I was shooting it the other day and the trigger was so light I fired a couple rounds when sighting in my scope before I was really ready by just touching the trigger. After a round is fired, the action cycles fine, but the trigger does not reset. So in a nutshell, the trigger will not reset, but all it takes is a slight push forward and then its ready -- but then pull is really really really light.

Suggestions? Before I look for a video on taking it apart.

Thanks!
Reply With Quote
  #2  
Old 09-14-2019, 02:59 AM
misterpepper

Join Date: 
Jul 2006
Posts: 
181
TPC Rating: 
0% (0)
I'm far from a T/CR22 (or 10/22) expert, but it sounds like you might be missing your trigger reset spring. It's a tricky little bigger to get in there and reassemble the trigger mechanism without a dummy pin.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Put an 7-2 in an 7-4 stock (trigger mod) hara-julu Russian Rimfires & Biathlon 15 09-06-2019 03:00 PM
Walther LGU Air Rifle rockdrill Air Rifles 1 09-04-2019 02:56 AM
Speedmaster ejection / trigger reset issues BadaBing11 Remington 1 09-25-2018 06:55 AM
Ok why is Pardini considered the Cadillac Dddrees Rimfire Handguns 128 07-28-2018 12:05 PM
Adjusting the Non-Adjustable Brno Model 1 Trigger OKShooter CZ / Brno 9 11-01-2013 08:44 PM



All times are GMT -5. The time now is 12:16 AM.

Privacy Policy

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©2000-2018 RimfireCentral.com
x