X22 Backpacker Sling Stud - RimfireCentral.com Forums

Go Back   RimfireCentral.com Forums > >

Notices

Join Team RFC to remove these ads.
Reply
 
Thread Tools Display Modes
  #1  
Old 08-24-2019, 11:27 PM
ptforums

Join Date: 
Mar 2017
Posts: 
6
TPC Rating: 
0% (0)
X22 Backpacker Sling Stud



Log in to see fewer ads
I wanted to have a simple way to attach a bipod to my backpacker. I had read in the thread below John Davies solution and wanted to try it.

https://www.rimfirecentral.com/forum...&postcount=209

I am happy with the end result and wanted to share the steps and some photos.


First, I removed the fore end and separated the two parts. There was a 2nd screw under the barrel pillar. I drilled through the existing screw hole closer to the latch (red arrows).


I used an Uncle Mike’s stud, it was a little long but a few moments with my handy Dremel took care of that.


With the stud mounted I was able to see where I had to remove material on the stock.


Used a small drill bit to see where the holes for the stud would end up. Then the Dremel to make it the right size for the stud


Here is the final fitting. The stud doesn’t interfere with the storage or the lock up of the fore end to the stock.


Initially I was concerned that the hole for the stud would be a problem but after thinking about it I am not concerned. While locked in place for transport and storage the stud is covering the hole. While I am using it, I am at the range with limited exposure to the elements so the chances of getting debris in there is minimal. I also plan to cut a form fitting patch of felt or clear flexible vinyl to line the bottom of the storage cubby with the hole. The stud would push a small bump into it but it should not be too severe.

Last edited by ptforums; 08-24-2019 at 11:32 PM.
Reply With Quote
  #2  
Old 08-24-2019, 11:37 PM
octanejunkie

Join Date: 
Jul 2018
Location: 
Los Angeles area
Posts: 
574
TPC Rating: 
100% (1)
Well done!

Sent from my Pixel XL using Tapatalk
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sling Stud on Boat Paddle clr8ter Ruger 77/22 23 09-09-2018 12:18 AM
Marlin XT22 Front Sling Stud, need a fix atomicsmurf Marlin Bolt Actions 7 02-01-2018 07:44 AM
Picatinny Rail Adapter Plate for sling stud? atomicsmurf Marlin Bolt Actions 5 01-22-2018 01:16 PM
Any slick ideas for X22 Backpacker sling? benhar Take-Down 10/22's 2 07-27-2017 10:50 AM
Marlin 795 Sling Stud for bipod deebo11b Marlin Semiautomatic 4 01-01-2017 07:41 PM



All times are GMT -5. The time now is 10:39 PM.

Privacy Policy

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©2000-2018 RimfireCentral.com
x