Chronographed 17 HMR - Page 2 - RimfireCentral.com Forums

Go Back   RimfireCentral.com Forums > >

Join Team RFC to remove these ads.
Reply
 
Thread Tools Display Modes
  #16  
Old 03-22-2019, 02:33 PM
plumas
Fire Fighter NRA Member - Click Here To Join!

Join Date: 
Dec 2017
Location: 
NE Ca
Posts: 
30
TPC Rating: 
0% (0)


Log in to see fewer ads
Jaia is right on...
the variables are overwhelming for most average shooters...still interesting to discuss though.

For my chrono info listed in a post here the temp was 45F, altitude 4600. The altitude alone reduces air friction and increases velocity as atmospheric pressure at that elevation is about 12.4 psi.

Are my findings of higher velocity than box labels attributed to the elevation? Longer or shorter barrel than the lab model, chamber fit to account for gas leaks..etc.

Without a like test from the same barrel at a different altitude and same ammo lot for comparison its hard to say...maybe someone else here understands more than I do.

Air temp will effect powder burn efficiency and pressure curve, and of course barrel length is thrown in there.

Too much for me...at 50-150 yards the science does not need to be that perfect...just an understanding of one's own equipment and a good trajectory chart and range finder for the off chance of a longer shot than 'dead-on' hold is good enough for me.
Reply With Quote
  #17  
Old 03-23-2019, 05:54 AM
Scott8401

Join Date: 
Mar 2019
Posts: 
13
TPC Rating: 
0% (0)
I have chrono'd my Savage 93R BTVS with a Magneto Speed V3 and they was higher than advertised. I haven't chrono'd my Ruger American Target with an 18 inch barrel yet and I plan to do so along with my Garrow upper. My plan is to chrono all 3 using the same lot numbers and try to find atleast 5 with same exact rim thickness to chrono to see if the SD improves.

Sent from my SAMSUNG-SM-G891A using Tapatalk
Reply With Quote
  #18  
Old 03-23-2019, 04:33 PM
plumas
Fire Fighter NRA Member - Click Here To Join!

Join Date: 
Dec 2017
Location: 
NE Ca
Posts: 
30
TPC Rating: 
0% (0)
The barrel lengths will be interesting...unless there is something special about .17
I would presume a 20-30 fps+- drop in velocity per inch lost can be expected?
Reply With Quote
 
  #19  
Old 03-23-2019, 08:05 PM
jagerman is online now

Join Date: 
Jul 2007
Posts: 
1,437
TPC Rating: 
50% (2)
Quote:
Originally Posted by Smoothtrigger View Post
For what it's worth, I've shot over 22,000 rounds of 17hmr over the last 9 years, and have never had a single spit case.
Never found one in a box, and never after it's been shot.

I only shot one box of Winchester, and they would barley chamber in my Anschutz's, and were hard to extract. Really complete crap.
Makes me wonder how tight some rifles chambers are.
Rifles are a Volquartesn Fusion semi-auto, a pair of Anschutz 1717's, and a Anschutz 1727F.

Smooth

Seems to me that people have either a poor chambered gun or maybe its older ammo and brittle but none the less they like to blame the ammo never the gun. Splits as frequent as mentioned above would have me questioning the gun. I've never been around what I considered a great hmr that had cz on the side either. I agree with the chamber statement and TNT ammo in most hmrs for accuracy. The volquartsen is a good choice too.
Reply With Quote
  #20  
Old 03-23-2019, 08:20 PM
Scott8401

Join Date: 
Mar 2019
Posts: 
13
TPC Rating: 
0% (0)
My brother and I mainly shoot 17hmr's from 3 different manufacturers without a split case. We mostly shoot Hornady 20 grain XTP's, CCI FMJ's and Federal Vshok TNT's.
Marlin XT
Savage 93R
Ruger American Rimfire Target

Sent from my SAMSUNG-SM-G891A using Tapatalk
Reply With Quote
  #21  
Old 03-23-2019, 08:42 PM
jaia
NRA Member - Click Here To Join!

Join Date: 
Apr 2014
Posts: 
5,238
TPC Rating: 
100% (2)
Some of us are just lucky I guess, when it comes to finding split necks...




Scott...all three of those labels are CCI products.

Last edited by jaia; 03-24-2019 at 01:34 PM.
Reply With Quote
  #22  
Old 03-24-2019, 07:20 PM
Ol` Joe
NRA Member - Click Here To Join!

Join Date: 
Apr 2006
Location: 
michigan
Posts: 
561
TPC Rating: 
0% (0)
Quote:
Originally Posted by jaia View Post
Some of us are just lucky I guess, when it comes to finding split necks...




Scott...all three of those labels are CCI products.
Shhhhhhh...

It is not just one brand over the years either.
Reply With Quote
  #23  
Old 03-26-2019, 09:48 AM
plumas
Fire Fighter NRA Member - Click Here To Join!

Join Date: 
Dec 2017
Location: 
NE Ca
Posts: 
30
TPC Rating: 
0% (0)
That un-fired split 17....any communication with CCI?...curious about their response both as a public relations nightmare and as any technical answer they may have offered.
Reply With Quote
  #24  
Old 03-26-2019, 10:29 AM
jaia
NRA Member - Click Here To Join!

Join Date: 
Apr 2014
Posts: 
5,238
TPC Rating: 
100% (2)
Nope, not worth the effort. One out of five hundred.
Used it to obtain a peek inside and look at the components.
Slight difference in the powder texture, smaller granules from the last time I pulled one apart.
The rest looked as expected.

Brass hardness varies depending on the supplier.
I read they neck down after priming and can't anneal with primer in the case.
Work hardening occurs and cracks happen.

Last edited by jaia; 03-26-2019 at 10:32 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Athlon Midas HMR 2.5-15x50 Riflescope - The Hunting Scope You've Been Waiting For gr8fuldoug Scopes, Sights, Rings & Mounts, and Other Optics 6 11-15-2018 05:53 PM
17 HMR - Observations rjferber .17HMR Ammunition 18 10-07-2018 12:19 PM
T-Bolt in 17 HMR, give me the good and the bad. Sub sailor Browning 4 09-12-2018 10:15 AM
22lr vs 17 hmr NevRimfire Open Rimfire 6 06-14-2018 07:26 PM
17 HMR Ammo Observations jerryz06 .17HMR 38 05-11-2018 11:54 PM



All times are GMT -5. The time now is 01:42 PM.

Privacy Policy

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©2000-2018 RimfireCentral.com
x