I know of two people that have tried the conversion with success. both of them took a slightly different approach to the same problem. finding the space for the magazine.
I'm starting mine this week and wanted to talk with those of you have have at least tried this.
here is what I am planning to do. I plan on shortening the trigger housing and not add holes to the reciever or the trigger housing.
the hard part is the plunger has to go back farther. the first part of limiting this is the magazine release. it's to wide to allow the plunger to be drawn back far enough. if you shave it down you can get a couple more mm.
but it's will stop after that becuase the mag release and plunger will start to bind. that angle can be changed pretty easily as well but is it enough?
I'm starting mine this week and wanted to talk with those of you have have at least tried this.
here is what I am planning to do. I plan on shortening the trigger housing and not add holes to the reciever or the trigger housing.
the hard part is the plunger has to go back farther. the first part of limiting this is the magazine release. it's to wide to allow the plunger to be drawn back far enough. if you shave it down you can get a couple more mm.
but it's will stop after that becuase the mag release and plunger will start to bind. that angle can be changed pretty easily as well but is it enough?