MK III Not Firing 100%
I MK III has decided to not fire now and again. I tried three different brands of ammo, and had the same issue with all brands. Some looked to be hit weak, while some others that did not fire looked hit plenty hard to have went off.
I took the bolt out and gave it a good cleaning, and Dry Lubed it. I hope that does the trick for todays Match. It did not look dirty enough to cause problems to me.
I made an order to Midway for a Tandemkross Fire Starter Firing Pin, Eagle Talon Extractor, as well as the Halo Charging Ring. I plan to start shooting Steel Challenge with it.
If it makes any difference it is a MK III Stainless Steel Hunter with a Fluted 4.25" Barrel.
Anything I need to be looking at besides the firing Pin?
Last edited by Viper225; 04-13-2019 at 06:42 PM.