JNP Action Screws Question - RimfireCentral.com Forums

Go Back   RimfireCentral.com Forums > >


Join Team RFC to remove these ads.
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-10-2016, 07:33 PM
US Navy Veteran NRA Member - Click Here To Join!

Join Date: 
May 2008
TPC Rating: 
100% (7)
JNP Action Screws Question

Log in to see fewer ads
First of all, I'm not lodging any kind of a complaint towards JNP. I'd just like to hear if my experience has been observed by anyone else. I've replaced the action screws on all my CZ/BRNO rifles with the JNP offerings and have had no trouble with any until today. I just got back my 527 from having the action bedded. I removed the action to do a clean and inspect of all metal. Upon replacing the action, when I hand tighten the action screws (JNP), the rear hex head sheared off at about 18 inLbs. I understand these screws are not supposed to get fatigued, and have only removed that action with these screws about four or five times total. On inspection of the screw, I could see that there is very little metal holding the head to the body of the screw. Anyways, just wondering how common this is. I went ahead and ordered another set from JNP tonite.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 07:53 AM.

Privacy Policy

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright 2000-2018 RimfireCentral.com