Rimfire Central Firearm Forum banner

slingshot mod

1K views 17 replies 11 participants last post by  RobK 
#1 ·
I am slowly bud surely getting a LITTLE BRAVER !!!:rolleyes:

THANKS AGAIN FOR ALL THE HELP WITH YOUR POSTS !!

It was a little harder than doing my 10-22 Charger being i added the spring . Other wise it would have been easier .:bthumb:

 
See less See more
1
#3 · (Edited)
The spring was from a small lighter that i shortened . I don't have a drill press but just used the Dremel and a drill bit .:bthumb:

There are two springs in a lighter i used the long skinny one thats inside it , not the one used with your thumb . I only used 1/4 of the spring .

 
#14 ·
they will work without the extra spring, I have three 22/45's that i altered years ago when I first got the idea and discussed it with Bullseye. Some of the levers may and will have a slight bow in the or a burred edge. If they are straight and smooth they will work every time, mine have been for a long time now.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top