Trigger does not release hammer - Forums

Go Back Forums > >


Join Team RFC to remove these ads.
Thread Tools Display Modes
Old 07-05-2019, 05:48 PM
US Navy Veteran NRA Member - Click Here To Join!

Join Date: 
Jul 2019
TPC Rating: 
0% (0)
Trigger does not release hammer

Log in to see fewer ads
Hi all. New here to the forum and I think I broke my SR22. I got it in May and had trouble with the disassembly. I'm not a total gun noob but for whatever reason I had difficulty getting the slide off. The release was really tight but I got it to drop. Then when I went to reassemble it, I had to pull the hammer way back to get the slide to go on. I think I broke something during this process.

Keep in mind I've only gotten this thing to fire 3 total times. Everything is brand new. I cleaned it before going to the range and I use ballistol and nothing else. My wife doesn't like the smell so it goes on pretty thin and I wipe most of it off.

Here are my symptoms. New mag CCI mini mag 40 gr. Insert mag and charge weapon. Everything looks good. Pull the trigger and the trigger goes all the way to the rear position and the hammer does nothing. Cycle the weapon. New round loads, goes bang when I pull the trigger then pull the trigger all the way back and nothing happens. Cycle the weapon. Pull the trigger. No bang.

When I pull the trigger and no bang, the trigger is totally lifeless. No resistance whatsoever. The hammer stays cocked.

When I have the weapon field stripped, the trigger flops. You can move it all around. I think I'm missing something in the assembly of the gun. It's like there is no connection between the trigger bar and whatever releases the hammer. I looked on YouTube university and there is a video taking about a magazine disconnect causing this issue. My gun is brand new as are the mags so I'm not sure this applies to me. Any help would be appreciated.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Do you use a release trigger SDBigDog1955 Bench Techniques and Equipment 1 01-18-2019 09:53 AM
How far back does your hammer go in DA? - Beretta 21A EngineerEli Beretta 12 12-14-2018 09:57 AM
89 Trigger to 87 - which parts? 87T Beretta 1 11-23-2018 02:03 PM
"New" John Langley CZ Trigger On The Way dnttech CZ / Brno 16 02-01-2018 10:05 AM
DST operation, firing when taking safety off after un-setting trigger Trigger1212 Anschutz 11 03-15-2017 11:53 PM

All times are GMT -5. The time now is 04:32 AM.

Privacy Policy

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2000-2018