Rimfire Central Firearm Forum banner

QR rings for BRNO 16mm rail...besides current Warne offerings?

655 views 4 replies 4 participants last post by  Gizmo60 
#1 ·
Ok, so I was cruising the interwebs yesterday and stumbled across a picture of a beautiful set of QR rings on a BRNO Model 1 project. Unfortunately, the maker wasn't mentioned.

So, I started looking around to see if I could find anything similar...a few brands came to mind, but between being super hard to find, or non existent for the 16mm rail, I am stuck.

I've looked at:
1. Talley: https://www.talleymanufacturing.com/product/quick-detachable-ring-w-lever/

2. Alaska Arms: https://alaskaarmsllc.com/collections/cz-scope-rings

3. Warne Premiers (predecessor to the maxima line, and much nicer...and difficult to find). I had a set that came on a BRNO Model 5 (16mm rail) that held an older Burris fixed 4x...never should have parted with that set up...oh well.

So, besides the current Warne Maxima offerings, does anyone know of another scope ring maker that offers a similar style to the picture below?

machined steel
blued
Release lever
Prefer vertically split, but horizontal is fine.

I was also wondering if other brand rifles (thinking Sako or Tikka?) has the same, or similar enough rail that rings for those brands would work on the BRNO rail. Might help expand my search.



Thanks,
DW
 
See less See more
1
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top