Ok ok, this time its a SS Heavy entry to be. It qualified SuperStock with the original barrel in a plastic stock bedded with the real duct tape.
I gave my Remmy 597-22, rebarreled with a threaded VQ barrel with comp, its first dose of Moly yesterday. As its a tensioned wrapped carbon fiber tube I didn't get it quite as warm as a steel tube as the CF is difficult to feel the temps. The heat gun was aimed at the muzzle end in a 3" tube so I checked/felt the receiver while warming it up. Dang new swab was too tight so I warmed it back up a bit while I shaved some of the fur off the swab. I saved all my old swabs but they were females and I no longer have the rod that fit em.
Today I'll put 10 rds of Minimags thru it in the basement to burnish the Moly in before treatment #2.
I still have a fair amount of the MF left as I got the 2 oz. kit way back when from Jon after a lengthy chat on the phone. This one is the 6th or 7th barrel so the MF goes pretty far if one isn't too sloppy/wasteful during applications.
___The wife's sistas are here again for a powwow and lunch. Said my polite hellos etc. and back to the man cave to burnish in a mag of Minimags rapid fire from the hip and apply the 3rd n final shlopping of MF to the bore. Rapid-fire from the hip burnishing in after the 2nd app was fun while filling the mancave air with smoky leaded goodness. I got the barrel toasty this time.
Changed my mind on the glass and will add a Weaver Classic 6-24 Varminter FD dot and put the metal in this bedded stock as seen this file photo.
https://www.rimfirecentral.com/forums/attachment.php?attachmentid=210561&stc=1&d=1585108175
I gave my Remmy 597-22, rebarreled with a threaded VQ barrel with comp, its first dose of Moly yesterday. As its a tensioned wrapped carbon fiber tube I didn't get it quite as warm as a steel tube as the CF is difficult to feel the temps. The heat gun was aimed at the muzzle end in a 3" tube so I checked/felt the receiver while warming it up. Dang new swab was too tight so I warmed it back up a bit while I shaved some of the fur off the swab. I saved all my old swabs but they were females and I no longer have the rod that fit em.
Today I'll put 10 rds of Minimags thru it in the basement to burnish the Moly in before treatment #2.
I still have a fair amount of the MF left as I got the 2 oz. kit way back when from Jon after a lengthy chat on the phone. This one is the 6th or 7th barrel so the MF goes pretty far if one isn't too sloppy/wasteful during applications.
___The wife's sistas are here again for a powwow and lunch. Said my polite hellos etc. and back to the man cave to burnish in a mag of Minimags rapid fire from the hip and apply the 3rd n final shlopping of MF to the bore. Rapid-fire from the hip burnishing in after the 2nd app was fun while filling the mancave air with smoky leaded goodness. I got the barrel toasty this time.
Changed my mind on the glass and will add a Weaver Classic 6-24 Varminter FD dot and put the metal in this bedded stock as seen this file photo.
https://www.rimfirecentral.com/forums/attachment.php?attachmentid=210561&stc=1&d=1585108175