RimfireCentral.com Forums - View Single Post - Springfield 1922 M2 - Damaged!
View Single Post
  #7  
Old 02-23-2021, 02:11 PM
Herschel
US Army NRA Member - Click Here To Join!

Join Date: 
Dec 2004
Location: 
Arkansas
Posts: 
113
TPC Rating: 
0% (0)
To remove the windage/elevation slide from the base just turn the knurled nut on the front
of the sight base counter clockwise as far as it will go. Then press it in and life the slide out
of the slot. To re-assemble it do the opposite but make sure the flat part on the release screw
is flush with the inside of the base or the slide will hit in when re-assembling. There is no need
to remove the sight base from the receiver.
Reply With Quote