RimfireCentral.com Forums - View Single Post - Kimber mod 82
Thread: Kimber mod 82
View Single Post
Old 06-28-2020, 09:40 AM
SageRat22's Avatar
NRA Member - Click Here To Join!

Join Date: 
May 2003
Great American West
TPC Rating: 
100% (12)
I'm with Hush, you need to go back and clean up your post up so we can read it easier. If your rifle is an early A, pre-bolt stop, it's likely the trigger pull has been set too light. While not an absolute, triggers set lighter than 2 pounds sometimes let the bolt slide all the way out when cycling.
Take the metal out of the stock and you will see two screws on the front of the trigger housing. Release the lock screw on the side of those screws and then turn the top one in 1/2 turn at a time until the increased tension on the sear keeps the bolt from coming out.
To Ride, Shoot Straight, Speak The Truth
NRA Benefactor Member
Reply With Quote