RimfireCentral.com Forums - View Single Post - Tippmann M4-22 Charging Handle Problem
View Single Post
  #2  
Old 05-16-2021, 08:28 AM
9x19 is online now

Join Date: 
Mar 2002
Posts: 
3,929
TPC Rating: 
100% (49)
Welcome.

First thing I'd check is the extractor engagement, with the bolt removed and a fired case, make sure the rim fits under the extractor with minimal effort.

Next is to check the extractor cut on the barrel, slip a round into the chamber and see if the rim extends over the extractor cut.

Finally, make sure the extractor cut is clean and free of debris, which could hold the extractor out away from the case rim.

Good luck
Reply With Quote