RimfireCentral.com Forums - View Single Post - J&P Hammer 39A Springs
View Single Post
  #66  
Old 05-08-2016, 12:16 PM
Gizzy's Avatar
Gizzy
NRA Member - Click Here To Join!

Join Date: 
Aug 2006
Location: 
Ohio
Posts: 
18,111
TPC Rating: 
100% (149)
Quote:
Originally Posted by Lance Boyle View Post
I ordered a Wolf last year from Brownells, they were out of the JP ones at the time. I wish I got the JP one but hey when your basket it full and your wants seem pressing.....

My trigger pull was better but still had some creep to be cleaned up. I also had some fail to fires with light hits. I may have jumped the gun but I put a bevel on the firing pin tip so that the strike hits mainly in line with the case wall on the other side of the rim. I read a bit on that one day and of some wasted E hitting the folded brass with no compound in it. My gun shoots reliably now.

I would like to polish up the surfaces a bit to cut the creep down. Once I do that and put on a merit hunting disc I think I'll be in heaven.
Sent you a PM on all of this. Also, I order my J&P springs right from J&P. They always have them, or have every time I or others here have needed them. J&P is a tad better in my opinion, but since you already have the Wolff, keep using it. As I put in the PM, you probably are due for a new firing pin.
Reply With Quote