RimfireCentral.com Forums - View Single Post - Browning BL 22
Thread: Browning BL 22
View Single Post
  #23  
Old 11-23-2019, 07:42 PM
Electraclyde's Avatar
Electraclyde
US Army Veteran NRA Member - Click Here To Join!

Join Date: 
Nov 2014
Location: 
Michigan
Posts: 
37
TPC Rating: 
0% (0)
Quote:
Originally Posted by sandog View Post
The WGRS receiver sight is pretty affordable, around $40. It is made of aluminum.
I think the Skinner looks better, is all steel, and is a lot lower, so you don't need such a high front sight. But the Skinner is closer to $100.

I have the WGRS peep and FireSight front combo on my Nylon 66. I think the WGRS is easier to adjust, but would be easier to be knocked off if you don't really crank those little screws tight.
The Skinner, once adjusted, seems like it will stay where you want it and never move. It uses Allen head screws, instead of the tiny screwdriver you'll need with the Williams.

One other thing worth mentioning is that the Williams WGRS will mar the top of your receiver. Once slid on your dovetail the sight secures with a hex screw that goes straight down and hits the top of your receiver. It will mar the receiver. You can hit the area with some touch up blue if you remove the sight, but that small mark will still be there.

The Skinner is split along the back of the base, and to secure the sight on your rails, there is a horizontal set screw that when tightened, draws the split closed.
This method is more secure and doesn't mar the receiver.
I have directly compared the William's set up I have with the Skinner set up on another members BL 22, and we both agree, the William's set up is not as tall as the Skinner, however we did not measure them.
The primary reason I went with the William's set up is I was able to drive to their location and enlist their help in determining the correct front light set up. Did not need to order a rear, install and shoot to see where POI would be and then order a front sight. That is how Skinner wants it done.
Reply With Quote