RimfireCentral.com Forums

RimfireCentral.com Forums (https://www.rimfirecentral.com/forums/index.php)
-   5mm Mag Ammo (https://www.rimfirecentral.com/forums/forumdisplay.php?f=274)
-   -   5mm converted to centerfire? Anyone? (https://www.rimfirecentral.com/forums/showthread.php?t=1195115)

RaiderANV 06-22-2020 12:19 AM

Because Winchester pumped 100's of thousands into advertising the 22MAG and Remington 10's of 1000's. They bought the market IMHO

wkd 06-24-2020 05:02 PM

I'd have to see proof of that, in that time frame Winchester was in financial trouble and Remington was flourishing. Plus the Remington rifles were a much better gun. The cartridge just failed to gain interest.

scooter22 06-24-2020 07:03 PM

Quote:

Originally Posted by RaiderANV (Post 11931645)
Because Winchester pumped 100's of thousands into advertising the 22MAG and Remington 10's of 1000's. They bought the market IMHO

Nah. I think it was several reasons. Having American rounds in the MM designation was new. THe 7MM Mag was just catching on. Then you had the .244/6MM screw up leaving shooters thinking whats, what? The .280 Rem should have out performed the .270 Win and 30-06 but wasn't close to either. Then the 5MM comes out. Some bought it like I did and within 10 years the cost almost tripled for a unreloadable round. Good Bye, hello cheap .223. Now we have all the internet to sing the praises of anything. Back then you bought what worked for people you knew or the gun mags praised.

rstang44 01-25-2021 03:48 PM

5 mm centerfire conversion
 
Still have my 5mm I bought when they first came out and it is a tack driver.
I bought a second rifle way back and converted it to the 5mm Craig. The brass was like tin foil and easy to wrinkle when loading. Never got it to perform as well as the factory Remington ammo.I sold the centerfire converted rifle along with the dies, brass and heads long ago. Aguilla ammo doesn't perform as well but it keeps the caliber alive.

MikeP 04-09-2021 01:38 PM

Well, I'm still reloading the little 5mm. Here's a post I made on the topic in the 5mm Forums just yesterday:

I have a couple of 5mm Remingtons with Schroeder centerfire bolt heads that two of my grandsons are interested in. The boys are nine and ten years old and like rifle and pistol shooting and all things related. I thought these would be a good start in their learning the art of handloading. One rifle is a 591, and the other a 592.

So yesterday I dusted off my 5mm RCBS dies and me and the boys loaded 100 rounds, each of them getting a 50-round box. The loads were comprised of 6 grains LilGun powder with either a 33-grain Hornady Vmax or a 36-grain Berger HP bullet, and Remington small pistol primers.

The brass is also from Schroeder, which is made from 22 Hornet cases. These cases have performed quite well for me during the 15 years I've been shooting them. I've got one group of 50 cases that I've reloaded 15 times so far, and none of the cases show any sign of problems. The only brass losses through the years have been a couple from neck-wrinkling from improper bullet insertion while being careless in reloading. Although the cases look a bit rough from the outside due to the conversion process using a lathe, they have proven to perform exceptionally well for me.

The overall length (OAL) of my handloads are designed to put the bullet real close to the rifling when chambered so there is little to no gap to jump, which can enhance accuracy. I'm careful to make sure they aren't long enough to jam in the rifling, because to do so usually means a stuck bullet and spilled powder in the action if they are withdrawn unfired. BTDT.

My handloads are about 1.48 inches OAL, compared to the rimfire factory OAL of 1.28 inches. The longer handloads with their aerodynamic long-nose bullets do not work through the magazines, but this is of no concern since I want to save the brass anyway. Forcefully ejecting the fired brass can cause it to disappear in the wild, so I am careful to extract them slowly and carefully to prevent that. I just hate to lose brass that can be reloaded many more times.

These 5mm rifles can achieve minute-of-angle accuracy at 100 yards with the right loads if the wind is not blowing and a proper bench rest technique is employed. They also do great on coyotes and crows out to 125 yards or so. With very little recoil, I believe the boys will be happy shooting these little gems.

The velocity from my handloads are around 2100fps, which is what I was looking for in order to approximate the velocity of the original 5mm rimfire cartridges from Remington. I could stuff a bit more powder into the case and get a few more fps, and indeed some folks have, but I find better accuracy not pushing for that last bit of speed. To me, accuracy is more important. And my cases last just about forever.


All times are GMT -5. The time now is 01:05 PM.

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright 2000-2018 RimfireCentral.com