RimfireCentral.com Forums

RimfireCentral.com Forums (https://www.rimfirecentral.com/forums/index.php)
-   Mk IV (https://www.rimfirecentral.com/forums/forumdisplay.php?f=377)
-   -   Volquartsen Accurizing Kit (https://www.rimfirecentral.com/forums/showthread.php?t=815641)

valor1 12-12-2016 09:19 AM

Volquartsen Accurizing kit is here
 
I just browsed a few minutes ago and saw Volquartsen offering their accurizing kit for the Mark IV including a bolt release.

https://www.volquartsen.com/departments/mk_iv_parts

Let us know your experience if you get one for Christmas.:)

KTGunsmithing 12-12-2016 09:20 AM

Volquartsen Accurizing Kit
 
Just got an e-mail from Volquartsen that they have an Accurizing Kit available for the MKIV.
https://volquartsen.com/inventory_configurations/1089

Test_Engineer 12-12-2016 10:09 AM

The picture looks like it's the same old accurizing kit. I thought they would have to at least make a different looking sear. Do you think it's just an old photo?

rws53 12-12-2016 10:21 AM

Quote:

Originally Posted by Test_Engineer (Post 7704873)
The picture looks like it's the same old accurizing kit. I thought they would have to at least make a different looking sear. Do you think it's just an old photo?

in the photo every thing looks the same except the trigger is definitely profiled differently to fit in the IV frame

flphotog 12-12-2016 03:02 PM

Thanks for the update. Ordered the mark iv about an hour ago and the kit just now. It will be good to get rid of the ruger trigger and mag disconnect as soon as I get the pistol.

SGW Gunsmith 12-12-2016 06:21 PM

The trigger [email protected]@KS different? :yikes: Looks like the same dang trigger they've been selling for 25 years. :rolleyes:

http://i915.photobucket.com/albums/a...ps376dcd8f.jpg

22/45 Fan 12-12-2016 06:49 PM

Quote:

Originally Posted by SGW Gunsmith (Post 7707393)
The trigger [email protected]@KS different? :yikes: Looks like the same dang trigger they've been selling for 25 years. :rolleyes:

The MkIV triggers have to be beveled at the front edges to match the radius of the frame's machined trigger pocket. It's a very minor change and not obvious from a photo unless you look closely.

I also ordered the kit today.

rws53 12-12-2016 07:34 PM

Quote:

Originally Posted by 22/45 Fan (Post 7707529)
The MkIV triggers have to be beveled at the front edges to match the radius of the frame's machined trigger pocket. It's a very minor change and not obvious from a photo unless you look closely.

I also ordered the kit today.


absolutely correct...just as I stated above...here's some pictures for those who didn't pick up the difference between a MK III and MKIV trigger.. the MKIV trigger is profiled differently than the MKIII's to fit in the MKIV frame.

VQ's MKIV trigger

http://i14.photobucket.com/albums/a3...psfjcwcqpl.jpg

Left side view
Ruger Factory MKIV trigger on left VQ's MKIII trigger on right

http://i14.photobucket.com/albums/a3...psehskvhzu.jpg

Right side side view
Ruger Factory MKIV trigger on left VQ's MKIII trigger on right


http://i14.photobucket.com/albums/a3...psvaucxuti.jpg

hooverjc 12-12-2016 10:04 PM

Ordered one too
 
Ordered one for my target and will see how it works before getting one for my hunter. Ordered extended bolt release also.

22/45 Fan 12-13-2016 07:59 AM

Quote:

Originally Posted by hooverjc (Post 7708745)
Ordered one for my target and will see how it works before getting one for my hunter. Ordered extended bolt release also.

The extended bolt release is less needed in the MkIV than in any previous Ruger Mk-series since the bolt can be "sling-shotted" without touching the bolt release and the factory release is also bigger and more accessible than earlier ones.

SGW Gunsmith 12-13-2016 10:21 AM

Quote:

Originally Posted by 22/45 Fan (Post 7707529)
The MkIV triggers have to be beveled at the front edges to match the radius of the frame's machined trigger pocket. It's a very minor change and not obvious from a photo unless you look closely.

I also ordered the kit today.

It is indeed, but should be very simple to alter the aftermarket trigger.

KTGunsmithing 12-13-2016 10:45 AM

Quote:

Originally Posted by SGW Gunsmith (Post 7710577)
It is indeed, but should be very simple to alter the aftermarket trigger.

Why? Seems Volquartsen has done their homework and their kit includes a trigger for the MK IVs' new contour..

KTGunsmithing 12-13-2016 11:17 AM

This thread appears to be about the VOLQUARTSEN ACCURIZING KIT.

But it's good to know that it benefited those that didn't know the MK IV trigger has a different shape and isn't the same dang trigger they've been selling for 25 years.

rws53 12-13-2016 11:21 AM

Got a tracking number for my VQ trigger kit...will have it on Thursday.

SGW Gunsmith 12-13-2016 11:41 AM

Quote:

Originally Posted by KTGunsmithing (Post 7710809)
This thread appears to be about the VOLQUARTSEN ACCURIZING KIT.

But it's good to know that it benefited those that didn't know the MK IV trigger has a different shape and isn't the same dang trigger they've been selling for 25 years.

http://i915.photobucket.com/albums/a...y-emoticon.gif


All times are GMT -5. The time now is 02:49 PM.

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2000-2018 RimfireCentral.com