RimfireCentral.com Forums

RimfireCentral.com Forums (https://www.rimfirecentral.com/forums/index.php)
-   Shooting Accessories (https://www.rimfirecentral.com/forums/forumdisplay.php?f=33)
-   -   Best bore solvent (https://www.rimfirecentral.com/forums/showthread.php?t=1123538)

gunsmith10367 06-23-2018 10:49 PM

Blame the EPA.............
 
when the EPA came along the make-up of most chemical formulations changed, not for the better I might ad. Gotta make things safe for the environment and consumers don't you know. Many components that made the formulations effective were scrapped and safer things were substituted.

ammohog 06-24-2018 09:09 AM

Order some Patches
 
The following has evolved over time. I usually use #9 and Butches, or Bore Tech Rimfire Blend, then C4. This post isn't about product, but procedure. Three wet patches with cleaner of choice, wet nylon brush 10-20 times, three more wet patches, then patch dry. Then 3 wet patches of carbon cleaner (Butches or C4), wet brush about 10-20 times, 3 more wet patches, then patch dry. If you are still getting "stuff" on your last patch, repeat current process. I know this may seem to be extensive cleaning, and not for the faint of heart. Using a borescope has led me to this and it works very well and lead and carbon are gone. I know I will get poo-poo'd by some who have an "easier way", and perhaps rightfully so. I only know one thing for sure........... The borescope doesn't lie. (This procedure does not apply to high quality lapped expensive target barrels.) You may get away with using a lesser method for a good while, but it will catch up with you eventually. That I know for sure. I know this sounds almost like the instructions on Rimfire Bore Blend, and you are right, they did almost hit the nail on the head. I wish there was a "one" solvent that removed all the usual suspects in a .22 barrel, but for now at least we have some that do work almost as well as a nickel's worth of leaded gas down the barrel and followed with some transmission fluid with a small torn rag tied to a string. Pass the coat hanger wire I straightened out, that rag is stuck again. Ha! Have fun storming the castle! ........ AH

NevRimfire 07-02-2018 06:02 PM

7/2/18 Update...used Gunzilla CLP to clean my CZ after shooting 300 22 lr rounds. Followed Gunzillas instructions to clean the bore...Gunzilla removed all fouling/crud in about half the time of my Hoppes 9 routine. Also used it to clean receiver area and breachface, extractor slots, bolt...removed all the fouling.

This is my new go to solvent and CLP. Safe on hands as well!


All times are GMT -5. The time now is 02:14 AM.

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright 2000-2018 RimfireCentral.com