RimfireCentral.com Forums

RimfireCentral.com Forums (https://www.rimfirecentral.com/forums/index.php)
-   Pay It Forward (https://www.rimfirecentral.com/forums/forumdisplay.php?f=295)
-   -   Package from Dr. G (https://www.rimfirecentral.com/forums/showthread.php?t=1177865)

Rick67 11-27-2019 02:00 PM

Package from Dr. G
 
Got it today!

I thought it was from a custom shop, my golly!

The contents are professionally prepared and done, ladies and gents :bthumb:..

They are cleaning tools for our toys :beerchug:

Muchos gracias, Mr. Kevin!

dbr65 11-27-2019 06:36 PM

They are indeed! He puts a lot of time and effort into those packages. :bthumb::bthumb:

Doug

Rick67 11-27-2019 09:42 PM

Quote:

Originally Posted by dbr65 (Post 11684635)
They are indeed! He puts a lot of time and effort into those packages. :bthumb::bthumb:

Doug

Sure thing, sir :bthumb:..

Pappy 11-28-2019 09:16 AM

Quote:

Originally Posted by Rick67 (Post 11684419)
Got it today!

I thought it was from a custom shop, my golly!

The contents are professionally prepared and done, ladies and gents :bthumb:..

Yes, he does just that...

Jammer22 11-28-2019 12:13 PM

That Dr Gunner! What a guy! :t:t:t

Nick7274 11-28-2019 12:18 PM

I've had one of Dr. G's kits for a while now and it is awesome. Truly the best rimfire cleaning kit I've ever used. Makes cleaning less of a chore. Great kit from a great person.

DrGunner 11-30-2019 12:06 PM

I just caught this- thanks for the words from all of you.
I sincerely hope that every recipient of my kits finds them
useful & helpful- personally, I’ve found them to save lots of time and ammo-

They are NOT meant to REPLACE a good old rod and brush.
Where they work best is as an “in between” full tear down and
full scrub cleanings, which can be done from a couple to a handful of times between deep cleaning, depending upon the surface of the rifles bore. Rifles with barrels that have top end bores that are lapped glass smooth will allow for more “Gunner cleanings“ than those that are rough or show chatter marks in the lands and grooves.
This kit also excels at quick cleanings between ammo changes when testing at the range, I find that when I use it for that purpose I usually need far fewer fouling shots when changing to a different ammo type. And finally, it is also very useful if I’m at the range shooting one of my custom semi autos, and have put perhaps half a brick of ammo down range and accuracy starts to fall off. A quick scrub out of the receiver, breech and bolt face/pocket with an M-16 toothbrush followed by quick chamber scrub and patch pull treatment on the barrel going from a jag puller to a loose button to a tight button will allow me to get back to shooting, confident that the rifle will come back and behave long enough to finish my shooting session.
All in a few minutes, without disassembling the rifle, in a kit that easily fits into one of my range bags.

Respectfully,

DrGunner

Rick67 11-30-2019 11:53 PM

Quote:

Originally Posted by DrGunner (Post 11687365)
I just caught this- thanks for the words from all of you.
I sincerely hope that every recipient of my kits finds them
useful & helpful- personally, I’ve found them to save lots of time and ammo-

They are NOT meant to REPLACE a good old rod and brush.
Where they work best is as an “in between” full tear down and
full scrub cleanings, which can be done from a couple to a handful of times between deep cleaning, depending upon the surface of the rifles bore. Rifles with barrels that have top end bores that are lapped glass smooth will allow for more “Gunner cleanings“ than those that are rough or show chatter marks in the lands and grooves.
This kit also excels at quick cleanings between ammo changes when testing at the range, I find that when I use it for that purpose I usually need far fewer fouling shots when changing to a different ammo type. And finally, it is also very useful if I’m at the range shooting one of my custom semi autos, and have put perhaps half a brick of ammo down range and accuracy starts to fall off. A quick scrub out of the receiver, breech and bolt face/pocket with an M-16 toothbrush followed by quick chamber scrub and patch pull treatment on the barrel going from a jag puller to a loose button to a tight button will allow me to get back to shooting, confident that the rifle will come back and behave long enough to finish my shooting session.
All in a few minutes, without disassembling the rifle, in a kit that easily fits into one of my range bags.

Respectfully,

DrGunner

When my wife saw it, she thought I ordered some stuff from a store, lol!

Merci beaucoup again, Dr. G!

Signalman 01-17-2020 08:44 AM

I got my Kit from DrGunner also and It is a fantastic gift...with all the stuff going on right now I have not touched a gun in months but my time is coming. :)

Signalman :mad::):D


All times are GMT -5. The time now is 02:54 AM.

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©2000-2018 RimfireCentral.com