RimfireCentral.com Forums

RimfireCentral.com Forums (https://www.rimfirecentral.com/forums/index.php)
-   Open Rimfire (https://www.rimfirecentral.com/forums/forumdisplay.php?f=4)
-   -   Something different for a steel plate match.......... (https://www.rimfirecentral.com/forums/showthread.php?t=1177043)

Area51guy 11-17-2019 12:13 PM

Something different for a steel plate match..........
 
1 Attachment(s)
My gun club had a rimfire steel plate match yesterday so I decided to take a couple of guns (pistol and rifle) that were a bit "off the wall" so to speak. I took a new KelTec CP33 with the 33 rd mags and a Pietta PSH-50 with a 50 rd drum mag! The PSH-50 is a rimfire lookalike of the Russian PPSH sub machine gun that will spit lots of rounds (semi auto, of course) in short order. However, even with some pretty quick stages I finished that course of fire in 3rd or 4th place. The KelTec will also spit out lots of rounds quickly but for the pistol course, I had to change mags every 10 rounds. The CP33 mags do not drop free but have to be pulled out of the mag well so those times were not too great! However, both guns got lots of attention and were a ton of fun! Maybe next time, I will take my 10/22 Thompson SMG conversion with a 110 rd mag!

A square 10 11-18-2019 09:27 PM

i picked up all the necessary parts to build one of those thompsons this year - winter project , looking forward to it , ill probably have a stock available after im done - those new synthetics are kinda nice , i almost feel bad disassembling the donor

Area51guy 11-19-2019 06:13 AM

Winter project
 
Quote:

Originally Posted by A square 10 (Post 11675565)
i picked up all the necessary parts to build one of those thompsons this year - winter project , looking forward to it , ill probably have a stock available after im done - those new synthetics are kinda nice , i almost feel bad disassembling the donor

I think you will discover that it will take less than an hour to do the conversion on your 1022. The kit is well designed and easy to assemble. I put all the original parts back into the box for later use if needed. One thing I would like to find is one of the ribbed barrels with military type front sights. I did find that the magazines will rock a bit from side to side when loaded into the receiver. I cut a small piece of thick tape and put one layer on each side of the magazine lips to help steady things up. The rear sight that comes with the kit works well but I will probably replace it with an adjustable Williams rear sight. These are great fun to shoot and draw lots of attention!


All times are GMT -5. The time now is 07:14 AM.

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright 2000-2018 RimfireCentral.com