RimfireCentral.com Forums

RimfireCentral.com Forums (https://www.rimfirecentral.com/forums/index.php)
-   Air Pistols (https://www.rimfirecentral.com/forums/forumdisplay.php?f=164)
-   -   747 Avanti problem (https://www.rimfirecentral.com/forums/showthread.php?t=1154033)

spoonbill82 03-10-2019 06:56 PM

747 Avanti problem
 
The large pin that connects the pump handle to the arm that goes to the arm to the pump head is loose. Is there a fix to this problem or is there some parts that have to be replaced.. The 4-H shooting sports club has several Daisy 717 and have never had a problem like this 747 Avanti has.

ron_c 04-03-2019 06:37 PM

You can restake the pin on both sides to keep it from coming out. Mine is loose and I have to do this every few years. You can also buy another new Pump Lever Assembly but that will also, in time, loosen.

PakProtector 12-04-2019 03:49 PM

The pin can be re-staked. Don't go too far. Also, the pin is not quite as long as the arm is thick, so take a bit of feeler blade and form it into a circle that is about pin dia to support it in the middle before applying hammer and punch. A small cut off wheel did quite well for me on the 777 I currently have charge of. My wife's 777 does not yet exhibit a loose pin, and hers has more miles on it than mine...LOL
cheers


All times are GMT -5. The time now is 10:41 AM.

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2000-2018 RimfireCentral.com