RimfireCentral.com Forums

RimfireCentral.com Forums (https://www.rimfirecentral.com/forums/index.php)
-   Rimfire Benchrest Factory/Unlimited (https://www.rimfirecentral.com/forums/forumdisplay.php?f=501)
-   -   May 2021 Rimfire Benchrest Factory/Unlimited (https://www.rimfirecentral.com/forums/showthread.php?t=1222729)

chuck40219 05-04-2021 01:18 PM

May 2021 Rimfire Benchrest Factory/Unlimited
 
Same match just a new name:

Rimfire Benchrest Factory/Unlimited

May 2021 RFC Benchrest Match

Good Day All

This match is:
Factory Benchrest, and Unlimited Benchrest

Factory Benchrest Rules
#1 Everyone starts out at 25 yds. then moves up to 50 yds. once they shoot a perfect target at 25 yds.
#2 Any factory gun with a cost below $1000.00
#3 Factory barrel
#4 Factory stock
#5 Factory trigger
#6 Any type of action
#7 Any 22LR ammo that is factory loaded
#8 Any type of sights
#9 Re-crowing of the barrel OK
#10 No one piece rest
#11 Bipod OK
#12 No tuner
#13 No barrel set backs
#14 No glass or pillar bedding

Unlimited Rules
#1 As above.
#2 No other rules

Target: Check your printed target, make sure the largest outer circle measures 1 in.
https://www.snapagogo.com/images/202...et-Style-7.jpg

To score:
https://www.snapagogo.com/images/202...ng-Example.jpg

Report your score and equipment information as follows
Factory or Unlimited
Your name or screen name
Rifle, ammo, score
Equipment list (rest front/rear, any thing special about your setup)
Weather/or shot indoors
Excuses: Anything you would like us to know about your shooting day.
Would be nice if you could post a photo of your setup.

chuck40219

Pipes1 05-05-2021 12:06 PM

1 Attachment(s)
Just back in town so first try for the month.

Factory, 25 yards
Screen Name: Pipes1 Name: Robert
Rifle: CZ 457 Varmint Precision Chassis, Vortex Strike Eagle 5-25x56, Ammo: SK Rifle Match, Score: 2225
SEB Mini front rest, Protektor rear bag.
Weather: Mild winds and 80 degrees.

Shorty123 05-05-2021 04:31 PM

First out of the box Robert. Good job.:bthumb:

ShawnCarlock 05-07-2021 11:47 AM

25 yard score
 
1 Attachment(s)
Factory, 25 yards
Screen Name: Shawn Carlock
Rifle: CZ 457 Varmint, Weaver T36, Ammo: Eley Tennex
Score: 2450
Harris 6-9" Bipod
Weather: 1-4 mph variable around buildings. Temp 72 deg.

Attachment 255331

chuck40219 05-07-2021 01:34 PM

[QUOTE=ShawnCarlock;12309517]Factory, 25 yards
Screen Name: Shawn Carlock
Rifle: CZ 457 Varmint, Weaver T36, Ammo: Eley Tennex
Score: 2450
Harris 6-9" Bipod
Weather: 1-4 mph variable around buildings. Temp 72 deg.

Great target, looks like Pipes1 and I have someone to chase.

Care to share your secrets?

Hopefully we will have some more shooters post targets this month.

chuck40219

Shorty123 05-07-2021 02:36 PM

Nice job Shawn!:bthumb:

ShawnCarlock 05-07-2021 02:39 PM

No real secrets, a good wind flag helps alot, even at 25 yards. My 457 shoots really well, better than all of the other CZ's that I own .(I have 8 of them in different configurations).

Pipes1 05-07-2021 05:34 PM

Nice shooting, Shawn. Setting the bar high so early in the month!

Pipes1 05-07-2021 05:37 PM

1 Attachment(s)
Another try this morning and gained just a bit.

Factory, 25 yards
Screen Name: Pipes1 Name: Robert
Rifle: CZ 457 Varmint Precision Chassis, Vortex Strike Eagle 5-25x56, Ammo: SK Rifle Match, Score: 2300
SEB Mini front rest, Protektor rear bag.
Weather: Mild winds and 85 degrees.

.

chuck40219 05-08-2021 05:10 PM

Quote:

Originally Posted by Pipes1 (Post 12309891)
Another try this morning and gained just a bit.

Factory, 25 yards
Screen Name: Pipes1 Name: Robert
Rifle: CZ 457 Varmint Precision Chassis, Vortex Strike Eagle 5-25x56, Ammo: SK Rifle Match, Score: 2300
SEB Mini front rest, Protektor rear bag.
Weather: Mild winds and 85 degrees.

.

Great target Pipes1.

chuck40219

chuck40219 05-08-2021 05:31 PM

My factory entry
 
Factory
chuck40219
CZ 457 AT-ONE VARMINT 22 LR 24", SK+, 2050
Clearidge Ultra RM 3x9x32 set at 9x
Sinclair front, Protektor rear
60*F, 7-8 mph, cloudy
Just started shooting with a bipod, still learning.

https://www.snapagogo.com/images/202...457-5-8-21.jpg

Gun photo not from today but current setup.
https://www.snapagogo.com/images/202...-The-Rifle.jpg

chuck40219

Appalachian2 05-08-2021 08:25 PM

3 Attachment(s)
Unlimited 25 yards
Appalachian
CZ 452 American 22LR, MDT chassis
Yo Dave trigger spring and shim
Lapua Center-X
Athlon Midas Tac 6-24
Harris bipod, Protektor rear
52*F, 7-9 MPH from my 7:00, cloudy
Score 2450
I used a plug on the three that were close.

I had to blow up my copy of a copy target to get it to the right size. I’m going to get the ARA Unlimited targets soon anyway.

This is the first time shooting with the chassis. The length of pull is long with this particular stock. I’m going to try to find something shorter that will ride a bag and or move the scope back some.

chuck40219 05-08-2021 09:30 PM

Appalachian
 
Unlimited 25 yards
Appalachian
CZ 452 American 22LR, MDT chassis
Yo Dave trigger spring and shim
Lapua Center-X
Athlon Midas Tac 6-24
Harris bipod, Protektor rear
52*F, 7-9 MPH from my 7:00, cloudy
Score 2450

Great target.

I’m going to get the ARA Unlimited targets soon anyway.

ARA Unlimited targets will work fine.

The length of pull is long with this particular stock. I’m going to try to find something shorter that will ride a bag and or move the scope back some.

You have a skill saw around there somewhere don't you. If not bring your stock over and we can shorten it in a hurry, you really don't need the cut to be squared up do you?

chuck40219

Pipes1 05-08-2021 10:03 PM

Great shooting, Appalachian, and a nice looking CZ.

Appalachian2 05-08-2021 10:23 PM

You have a skill saw around there somewhere don't you. If not bring your stock over and we can shorten it in a hurry, you really don't need the cut to be squared up do you?

chuck40219[/QUOTE]
Thanks.
That stock is too expensive to cut up. 😆
If anything It’ll end up on an AR-10. If I
can’t find a shorter stock I’ll put it back in a Pro Varmint stock. I have a few factory rifles to try if I can get time.

Appalachian2 05-08-2021 10:25 PM

Quote:

Originally Posted by Pipes1 (Post 12311237)
Great shooting, Appalachian, and a nice looking CZ.

Thank you. You’re just being nice. I think it’s pretty ugly. 😝 I don’t much care about looks when I’m shooting though. I have a prettier 457 MTR en route.

chuck40219 05-09-2021 07:53 AM

Quote:

Originally Posted by Appalachian2 (Post 12311249)
Thank you. Youíre just being nice. I think itís pretty ugly. 😝 I donít much care about looks when Iím shooting though. I have a prettier 457 MTR en route.

Looking forward to a target from your MTR.

Chuck40219

Pipes1 05-09-2021 09:44 AM

1 Attachment(s)
[QUOTE=Appalachian2;12311249]Thank you. You’re just being nice. I think it’s pretty ugly. 😝

My wife would say I am never nice, Appalachian.
While the wood stocks do add a more pleasing look, with some having amazing grain, I also like the chassis styles. New to the shooting sports and only have the one rifle but would love to add a wood stocked one down the road.
Robert

Sg1911 05-11-2021 03:17 PM

Managed to print some targets today. I have a rem 541 to shoot in factory, but not sure about unlimited. I have a 77/22 that has been Re barreled and re stocked , Both none ruger not sure about the trigger. Would it qualify as a unlimited for these matches?

Pipes1 05-11-2021 10:33 PM

Quote:

Originally Posted by Sg1911 (Post 12314089)
Managed to print some targets today. I have a rem 541 to shoot in factory, but not sure about unlimited. I have a 77/22 that has been Re barreled and re stocked , Both none ruger not sure about the trigger. Would it qualify as a unlimited for these matches?


Hi Sg1911 and glad to see another shooter join the group. I am sure that Chuck, the admin, will respond.

My understanding of the rules would certainly allow your 77/22 in the "unlimited" class as it is wide open to everything that doesn't fit the rules for "factory". We don't seem to have any shooters with full custom benchrest rigs yet but would be nice to build the unlimited class with a variety. I started out listing as unlimited as I had purchased a new front rest and it was set up with a 3" bag so attached a bag rider to my stock, making it modified and therefore unlimited class. After my smaller bag came in I was able to remove the bag rider and switch to factory class.

This group seems to be all about having fun so happy to have you on board.
Robert

chuck40219 05-12-2021 07:56 AM

Quote:

Originally Posted by Sg1911 (Post 12314089)
Managed to print some targets today. I have a rem 541 to shoot in factory, but not sure about unlimited. I have a 77/22 that has been Re barreled and re stocked , Both none ruger not sure about the trigger. Would it qualify as a unlimited for these matches?

From what I read from your comments, your asking about if the Ruger 77/22 that has been re barreled and restocked works for the unlimited class. Yes it would fit right in.

Come on out and shoot. Just remember to check your target to make sure it printed the correct size.

Chuck40219

stubby001 05-12-2021 08:22 AM

So do we print this target?

chuck40219 05-12-2021 09:26 AM

Quote:

Originally Posted by stubby001 (Post 12314629)
So do we print this target?

Sure do, prints on 8.5x11 paper, best to print on a card stock (heavy weigh paper). Click on the target image and tell your computer to download it, then set your printer at 100% and print. Check the measurement of the largest scoring ring. It should measure right at 1 in. Or you could take a copy of the file to someplace and have it printed. And another OR if you have any ARA Unlimited targets you could use those.

Happy shooting
Chuck40219

stubby001 05-12-2021 09:52 AM

Quote:

Originally Posted by stubby001 (Post 12314629)
So do we print this target?

I answered my own question. Got some printed!:)

stubby001 05-12-2021 09:53 AM

Quote:

Originally Posted by chuck40219 (Post 12314673)
Sure do, prints on 8.5x11 paper, best to print on a card stock (heavy weigh paper). Click on the target image and tell your computer to download it, then set your printer at 100% and print. Check the measurement of the largest scoring ring. It should measure right at 1 in. Or you could take a copy of the file to someplace and have it printed. And another OR if you have any ARA Unlimited targets you could use those.

Happy shooting
Chuck40219

Thanks Chuck!


All times are GMT -5. The time now is 10:11 PM.

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright ©2000-2018 RimfireCentral.com