RimfireCentral.com Forums

RimfireCentral.com Forums (https://www.rimfirecentral.com/forums/index.php)
-   Browning (https://www.rimfirecentral.com/forums/forumdisplay.php?f=17)
-   -   BL-22 Trigger Pull Data (https://www.rimfirecentral.com/forums/showthread.php?t=488688)

drewerts 02-09-2015 03:49 PM

Bl-22
 
I purchased new; probably less than 100 rounds through the pipe. No trigger work.

anotherone 01-12-2017 06:23 PM

BL22 Trigger Pull
 
BL22
Grade II
New - Purchased 09-11-2016 but never fired because of trigger pull
Terrible - cleaned, oiled, greased and operated mechanism 100's of times
I thought it was beginning to get somewhat lighter, but I purchased a Lyman electronic trigger pull gauge; and it actually matched my purchase date.

9# 11oz - I will have it worked on when I find a competent gunsmith. I do not have the expertise to work on it, but I'll never fire it in its current condition. I have several Ruger 10/22's and Henry's. Actually, I have a Crickett I would rather shoot.

TerrierCarrier 01-13-2017 07:27 PM

Nice thread. I have 2 BL-22s

One purchased new, the other a used $100 gun store find. The gun store find is a well used rifle, the finish is shot with light surface rust on the receiver, lever, and barrel. But for $100, it is a great buy for a desert plinker.

Both rifles are shot as they came with no attempt made to improve trigger pulls. Both have uncounted 1000s of rounds through them. No difference in accuracy can be identified between the two. The older rifle does not have a gold Browning buck on the underside of the trigger guard, the newer rifle does.

The new rifle has much nicer wood than the older rifle. The old stock is very plain, the new rifle has some nice curl to the walnut in the butt stock.

1971: 71B579xx
3# 8oz trigger pull

2001: 026xxMZ242
5# trigger pull

Sorry, no photos.

Don

284wahoo 01-16-2017 10:32 PM

Is there a prize for the roughest looking BL-22 in this thread? Just started another thread to introduce us, so I won't turn over all that ground again here. I'll just say, it's new to me, and a work in progress.

- S/N = 70F(or P)XXXXXX
- Patent Pending
- Trigger pull (dry) = 5.0 Lb.s, no perceptible creep, very crisp.

While this rifle looks well worn on the surface, I suspect it's from someone's handy work at stripping the blue, and it seems to not have been shot a whole lot. The bore looks so good, with the rifling super sharp. Inside of the action does not show hardly any rubbing marks. Main spring is VERY heavy. Hammer face does not show much wear. Firing pin face does not look polished.

So what are the common flags that point to high use on a BL-22 anyways?

http://i476.photobucket.com/albums/r...ps0zfgjnro.jpg

http://i476.photobucket.com/albums/r...psrq32140x.jpg

gokyo 03-24-2018 06:19 PM

My BL-22 bought march 2018

The trigger pull measures 4 lbs 2 oz

It has a about 50 rounds.

DLS 03-28-2018 08:11 PM

Quote:

Originally Posted by 284wahoo (Post 7956666)
...So what are the common flags that point to high use on a BL-22 anyways?


Other than a high area of polish on the top to of the bolt (due to wear) my BL-22 looks pretty much brand new. I was gifted this rifle in the mid '70s and it has had countless bricks of ammo fired through it.

I have been fastidious in it's care (my first rifle after all) but even so you would expect to see some bluing wear on the lever and trigger, but it's not there.

Seaweed02 05-16-2019 12:18 PM

My BL22
 
Brand New in 2019. It is a BL-22 Micro Midas that I bought for teaching my grandson how to shoot. It is very nicely built but the trigger right out of the box was 7.4 pounds. Too much for my grandson. So I followed This thread and actually contributed to it by including a couple of links to YouTube Videos that gave instructions on how to disassemble the rifle, install a spring kit, and reassemble the rifle. Now my rifle has a 4.2 pound trigger.

Here is the link to the old thread that I followed and then contributed to. My contributions are on Page 4 of this thread which was started by member OldWolf.
https://www.rimfirecentral.com/forum...d.php?t=826922

jcp1300 07-06-2019 04:41 PM

I purchased a Browning BL-22 G2 in March of '18. Very pleased with the appearance of the rifle and the working of the action. The trigger pull was still off the scale of my Wheeler gage (8# max) after about 500 rounds. Luckily I found the thread by OldWolf about the trigger tuning kit, got one and installed it. Trigger is now 5# exactly and crisp. Excellent trigger for field use.
Thanks OldWolf for the outstanding thread.
Edit....
After a bit of further tinkering the pull is down to 3# 12oz.

DLS 11-16-2019 11:32 PM

Quote:

Originally Posted by jcp1300 (Post 11535919)
I purchased a Browning BL-22 G2 in March of '18. Very pleased with the appearance of the rifle and the working of the action. The trigger pull was still off the scale of my Wheeler gage (8# max) after about 500 rounds. Luckily I found the thread by OldWolf about the trigger tuning kit, got one and installed it. Trigger is now 5# exactly and crisp. Excellent trigger for field use.
Thanks OldWolf for the outstanding thread.
Edit....
After a bit of further tinkering the pull is down to 3# 12oz.

Could you post the link to that thread? (hoping you are still watching this thread)

jcp1300 11-17-2019 02:29 PM

Try this....https://www.rimfirecentral.com/forum...d.php?t=826922

DLS 11-27-2019 06:16 PM

A very belated thank you jcp1300! I may give that spring kit a try.

Semper Fi


All times are GMT -5. The time now is 04:27 PM.

DMCA Notice

Powered by vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright 2000-2018 RimfireCentral.com