Rimfire Central Firearm Forum banner

DeCock Mkll

1K views 5 replies 4 participants last post by  FredVK 
#1 ·
I can't figure out how to decock my MKll to break down. Trigger will not work so I wanted to take apart . I cannot remove the mainspring thing on rear of frame. I have put in a couple of Volquartsen kits but I am hung up.
 
#6 · (Edited)
If you want a real challenge to really hang you up have the mainspring housing latch pivot pin (or bolt stop pivot pin) drift over. This will effectively lock in the mainspring assembly. Very rare but happened to me once on a well worn MKII. After I finally figured out what was going on it took over an hour to clear that one.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top