Originally Posted by gwc1584
Sent from my iPhone using Tapatalk
then it sounds like the safety has been rotated and the detent is in the notch for the sear clearance...the notch shown at the bottom of the safety in the pic below
if you're lucky, and have strong fingers, you may be able to rotate it back into position...
just pinch it between your thumb and index finger and see if you can turn it about 45 degrees....if you can, keep the safety centered in the trigger housing and just keep slowly turning it till you feel the detent fall into the notches that it's supposed to ride in..the one at the top in the pic
just be careful when you have the detent in between any of the notches, as you will be able to push the safety all the way out of the trigger housing at that point...if that happens then you will have to disassemble the whole thing in order to replace the detent, spring, and safety button