Yes there is. If you have a mill or you are real good with a drill press. There is a thread by Azguy that explains how and all the dimensions. I had a local smith do mine for me and cost $50. 00 Bucks. I think Azguy does them also.
Allow me! If you want few or no problems with fitment, I have found that the Kidd receiver on a Titan with rear hold down is the ticket. The Ruger actions I have tried and currently have in a Titan took some filing. Not a big deal if you have the patience.
Last edited by billysue; 02-01-2017 at 02:34 PM.