Yup, should, with aid of a 7/16” punch, punch rite out without a great deal of effort. Going back in should be even easier, possibly too easy and it might need gluing in to get the thang to stay put.
Or, glue in these after a little prep:
The skinny of a Raven Eye flanged pillar is a tad less than 7/16” so it should be an easy enuf push-in fit going into the existing hole drilled for a factory Ruger escutcheon. The overall length of the Raven Eye pillar with flange sufficiently let into the stock and the pillar’s bottom side resting atop the height of Ruger’s escutcheon is the ideal length for use with a factory Ruger length action screw.